Menu
0

Search

For bulk order, please contact sales@worldronemarket.com and we will provide the best service and price for you. Thank you!
0

Category: Product Manual

Home / Product Manual
Skydroid S12 User Manual

Skydroid S12 User Manual

2025-07-03
1.Product Introduction S12 uses cutting-edge wireless frequency band detection technology to provide an ultra-long detection range of 0~6GHz. Users can customize frequency settings to effectively reduce background interference and ensure accurate identification of drone types. S12 has high sensitivity and long-range detection capabilities, and can monitor multiple drones at the same
Drone remote control--Skydroid H12

How To Operate Drone Remote Control?

2025-06-27
This guide shows how to operate drone remote control, using Skydroid as an example, covering pre-flight prep, basic maneuvers, advanced camera settings, smart modes, and safety tips for confident flying.
Hobbywing UBEC 25A HV

Hobbywing UBEC 25A HV User Manual

2025-06-18
Introduction The UBEC is an exter nal switching-mode DC-DC r egulator chip. It draws the DC voltage from a 3-18S LiPo battery and dr ops the voltage to a level suitable for r eceivers and other electronic devices and keeps pr oviding the stable curr ent output of up to 25Amp. The
Skydroid S2 Professional User Manual

Skydroid S2 Professional User Manual

2025-06-12
I. S2 Overview 1.1. Main Items 1.2. Ports and Definitions Flight Control Status Light Meaning: Red & blue rapid blinking: IMU initialization in progress Red & blue & green rapid blinking: ESC calibration mode Blue & yellow alternately blinking: GPS failure Red &yellow blinking: EKF failure Yellow blinking: battery failure/remote control signal loss Green light
Holybro GPS And RTK System Setup And Getting Started Tutorial

Holybro GPS And RTK System Setup And Getting Started Tutorial

2025-05-30
Setup & Getting Started (PX4) Getting started n this section of the manual, we will cover the basic setup of the units. To setup the RTK units with PX4, you will need QGroundControl installed on your computer or Ground Control Station and PX4 installed on your flight controller. If you are using
E6 User Manual

SIYI E6 Propulsion System User Manual

2025-05-21
CHAPTER 1 INTRODUCTION 1.1 Product Features Powerful Performance The maximum recommended thrust per rotor reaches 6kg, with a thrust-to-weight ratio of 7.0G/W. With enhanced power redundancy, the system enables smoother flight under load and longer operational endurance, improving work efficiency. Modular Design This integrated propulsion system eliminates the need for complex assembly of power components.
CUAV CPBD Pro

CUAV CPBD Pro

2025-05-14
CPBD Pro CPDB Pro is a board that integrates a power monitor and a splitter. It has the characteristics of high accuracy and high working voltage. It is mainly used in Copter drones. Features Support higher input voltage: 10V-60V (3S-14S battery) More accurate voltage and current monitor Maximum 5A power output(bec）
VK V10 Pro V12 User Manual

VK V10 Pro V12 User Manual

2025-04-25
V10 Instruction 1 Equipment List Module EquipmentModelQuantityMain ControlV10-PRO1RTK Positioning AntennaRTK-ANT2Gnss ModuleGNSS1 2 Installation and Debugging 2.1 Schematic Diagram of the Connection 2.2 Interfaces of the Flight Control Module InterfaceDescriptionRemarksPWRFlight control power input6~120V wide voltage input power supplyM1~M16PWM signal interfaceConnect to actuator devices such as ESCs and servos, Refer to the aircraft model settings in the ground
Holybro ST VL53L1X Lidar User Manual

Holybro ST VL53L1X Lidar User Manual

2025-04-10
Description The VL53L1X is a state-of-the-art, Time-of-Flight (ToF), laser-ranging sensor, enhancing the ST FlightSense™ product family. It is the fastest miniature ToF sensor on the market with accurate ranging up to 4 m and fast ranging frequency up to 50 Hz Features Fully integrated miniature module – Emitter: 940 nm invisible laser (Class1) –
Holybro DroneCAN Power Module Setup

Holybro DroneCAN Power Module Setup

2025-04-07
Parameter Setup Ardupilot Connect the Power Module CAN connector to the Flight Controller's CAN1 Port Change the following parameters: CAN_P1_DRIVER=1 CAN_SLCAN_CPORT=1 BATT_MONITOR=8  BATT_OPTIONS=1 Unplug the Power and Restart the Flight Controller Optional: Right-click on MissionPlanner -> User Items -> Check battery temp to display the temperature on the interface. PX4 The CAN Power module is supported in version
VK V9-AG User Manual

VK V9-AG User Manual

2025-03-31
1. installation and debugging 1.1 Product List List of table system modules Module explain Main controller FMU+PMU (standard configuration) V9-FMU: Dimensions: 73 * 41 * 19 mm Weight: 65 g Power supply: 5 v V9-PMU: Dimensions: 88 * 44 * 16 mm Weight: 75 g Power supply: 20- -100 v GNSS (standard configuration) Dimensions: 64 * 64 * 14mm Weight: 60 g pattern:GPS+GLONASS+BD LED (standard configuration) LED light refer
Skydroid C13 User Manual

Skydroid C13 User Manual

2025-03-13
I. Product Introduction The C13 is a compact high - definition three - light gimbal. It utilizes a new - generation imaging chip and is paired with a high - definition distortion - free camera. With an effective pixel count of 5 million, it boasts robust 2K video recording and photo
Back to Top

Leave your Email address for further contact

Send cart items to your email and continue shopping later.

Your email address will help us support your shopping experience throughout the site. Please check our Privacy Policy to see how we use your personal data.
No Thanks!
Product has been added to your cart