Mateksys Power Module PM12S-3
- The Mateksys Power Module PM12S-3 is a voltage regulator module designed specifically for use in multi-rotor aircraft. It is mainly used to provide a stable and reliable power supply to various onboard components, such as flight controller, receiver, and other accessories.
- This power module features a 12S (50.4V) input voltage range, which makes it compatible with high-capacity LiPo batteries commonly used in large drones. It also incorporates a current sensor that allows you to monitor the power consumption of your aircraft in real-time.
- The Mateksys Power Module PM12S-3 has built-in short circuit protection and over-current protection to ensure the safety of your electronic components. It also has a noise filter to reduce electrical interference, which can improve the overall performance and reliability of your drone.
- Overall, the Mateksys Power Module PM12S-3 is a reliable and efficient power supply solution for multi-rotor aircraft, providing stable power and protecting your onboard electronics.
Follow us World Drone Market on our YouTube to view more about the Mateksys Power Module PM12S-3
Note: If the input voltage is noisy, capacitor is required to be soldered to the input pads.
Features
- BEC Vx, 5.25V/6V/8V options, 15A cont., 25A Peak 1K:20K voltage divider built-in (Volt 1/21 Input voltage)
- 3x independent Step-Down Voltage Regulators
- BEC 12V, 4A continuous, 6A Peak
- BEC 5V, 4A continuous, 6A Peak
- 9-55V DC IN (3-12S LiPo)
Specifications
- BEC Vx: 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
- Operating Input Range with TVS protection: 9V to 55V
- Voltage Divider: 1K:20K (Volt = 1/21 Input voltage)
- Voltage Regulators: 3x independent Step-Down
- BEC 12V: (Fixed), 4A continuous
- BEC 5V: (Fixed), 4A continuous
- Size: 61x40x15mm
- Weight: 53g
BEC Vx
- Synchronous switching step-down (or buck) regulator efficiencies: 90% to 96%
- Output ripple: 32mV (VIN=50V, Output 5.25V @ 15A), 43mV (VIN=50V, Output @ 5A)
- Supports typical continuous output current: Up to 15A, Peak current of up to 25A.
- Reverse Input voltage protection: NoOutput voltage tolerance 1.5%
- Output voltage: 5.25V / 6V / 8V options.
- Output Short-circuit tolerance: 2 seconds
- Standby current: 10~20mA
BEC 5V
- Output ripple: 20mV (VIN=24V, Output @ 5A), 50mV (VIN=50V, Output @ 5A)
- Continuous output: current of up to 4A, Peak current of 6A
- Output Short-circuit tolerance: 2 seconds
- Reverse Input voltage protection: No
- Output voltage: 5.2V, tolerance 1.5%
BEC 12V
- Output ripple: 18mV (VIN=24V, Output @ 5A), 32mV (VIN=50V, Output @ 5A)
- Continuous output current: Up to 4A, Peak current of 6A
- Tip: Input voltage >= 13V is required for stable 12V output
- Output Short-circuit tolerance: 2 seconds
- Reverse Input voltage protection: No
- Output voltage: 12V, tolerance 1.5%
There are no reviews yet.