CUAV C-RTK 2 PPK GNSS Module

CUAV C-RTK 2 PPK GNSS Module

high precision Multi-Star Multi-Frequency RTK PPK GNSS Module

C-RTK 2 is a fully functional, cost-effective RTK module that can record raw data and shutter recording, support RTK and PPK, and can be used as a mobile station or base station. Using CAN bus communication mode, support high-speed USB and TF card storage, built-in RM3100 industrial electronic compass sensor, MS5611 barometer, ICM-42688-P Inertial navigation module module, using STM32H7 processor, running real-time system, especially suitable for aerial survey, agricultural plant protection and other application scenarios.

CUAV C-RTK 2 is a high-performance PPK/RTK positioning module created for professional application fields such as UAV aerial survey; It integrates light appearance, industrial grade IMU, multi-star and multi-frequency satellite receiver, supports both RTK centimeter-level positioning navigation and RAW data recording for post-differential calculation. Supports shutter triggering and hotshoe synchronization. It adopts CAN bus protocol and is compatible with PX4/ArduPilot open-source flight controller. It can be applied to various specifications of multi-rotor, VTOL fixed wing, helicopter and other industrial use UAVs.

Follow us World Drone Market on our YouTube to view more about the CUAV C-RTK 2 PPK GNSS Module.

CUAV C-RTK 2 PPK GNSS Module Characteristics

• High-performance H7 processor
• High precision industrial grade IMU
• Support RTK and save RAW data (PPK) at the same time
• Multi-satellite and multi-frequency receivers
• UAVCAN/Dronecan protocol
• Support hotshoe and shutter trigger
• HS_USB and U disk mode

Multi-star Multi-Frequency High-Precision Positioning RTK PPK GNSS Module

Built-in u-blox F9P multi-star multi-frequency satellite receiver, support GPS, Beidou, Glonass, Galieo four satellite systems, and support the simultaneous reception of four satellite systems, positioning accuracy ≤rtk 0.01 m + 1ppm CEP.

Both RTK&PPK are Supported

CUAV C RTK 2 supports both RTK and PPK functions and supports up to 25Hz raw data recording. It is very suitable for surveying and mapping, unmanned driving, unmanned vehicles, inspection, agriculture and other fields.

Less Control Point

By using C-RTK 2 for mapping, the control point can be reduced by more than 80%. With the use of professional mapping camera, can even realized control point free.

Dual Platforms Support Plug&Play

CUAV C-RTK 2 adopts UAVCAN/Dronecan bus protocol; Perfect compatibility with PX4/ArduPilot; With CUAV series flight controllers, plug and play can be realized.

Applicable to Multiple Scenarios

CUAV C-RTK 2 is very suitable for mapping, UGV, Agricultural and other more scenarios.

The CUAV C-RTK 2 PPK GNSS can support all versions of CUAV Flight Controllers.