Hot
CUAV NEO 3 Pro GPS
$169.00
Products include:
- NEO 3 Pro module*1
- GPS Stand*1
- CAN connect cable*1
CUAV NEO 3 Pro GPS Module | GNSS U-BLOX M9N CAN BUS
CUAV NEO 3 Pro GPS continues the hardware design of NEO V2, upgrade the GNSS module to Ublox NEO M9N, supports Beidou, Galileo, Glonas and GPS receive at the same time, and the horizontal positioning accuracy is up to 0.7M. Integrated with safety switch, buzzer, RGB light.
Follow us World Drone Market on our YouTube to view more about the CUVA NEO 3 GPS.
Ublox M9N Satellite receiver
It is a new generation satellite receiver based on Ublox M9N, the actual measurement can reach a maximum accuracy of 0.7m.
Simultaneous reception by the four satellite systems
It supports simultaneous reception of Beidou, Galileo, Glonas, and GPS four satellite systems. Also, it has the high-performance processing unit STM32F412 built-in and using RM3100 industrial grade sensor, has better anti-interference performance.
Triple filter design
NEO 3 Pro adopts SAW+LNA+SAW triple filter design, effectively avoiding the influence of remote control, data transmission, 4G signal on GPS positioning reception.
NEO 3 Pro level accuracy when the SBAS enhancement system is turned on, the nominal accuracy is 1.5 m (default); when the SBAS enhancement system is turned off, it is 2.0 m. NEO 3 Pro supports RTCM3.3 injection, but does not support RTCM output; it can achieve pseudo range differential (meter-level positioning) but does not support carrier phase differential (RTK), and it needs a base station that supports RTCM3.3 output.
For installation and configuration, please visit CUAV NEO V3 Pro GPS Manual
Check out the regular version of CUAV GPS: CUAV NEO 3 GPS
| Weight | 0.25 kg |
|---|---|
| Dimensions | 10 × 10 × 5 cm |
Customers reviews
You must be logged in to post a review.
| Processor | STM32F412 |
| Compass | RM3100 |
| Barometer | MS5611 |
| GNSS receiver | UBLOX NEO M9N |
| RGB drive | NCP5623C |
| Buzzer | Passive buzzer |
| Safety switch | Physical button |
| GNSS | Beidou、Galileo、 GLONASS、 GPS |
| GNSS Augmentation System | SBAS:WAAS,EGNOS,MSAS QZSS:L1s(SAIF) other：RTCM3.3 |
| Number of concurrent GNSS | 4 |
| Frequency band | GPS:L1C/A GLONASS:L10F Beidou:B1I Galileo:E1B/C |
| Horizontal accuracy | 2.0M |
| Speed accuracy | 0.05M/S |
| Nav. update rate | 25Hz(Max) |
| Acquisition | Cold start：24S Hot start：2S Aided start:2s |
| Number of satellites(MAX) | 32+ |
| Sensitivity | Tracking and nav-167dBm Cold start Hot star-148dBm Reacquisition -160dBm |
| Protocol | UAVCAN |
| Port Type | GHR-04V-S |
| Supported flight controller | CUAV series, Pixahwk series |
| Wave filtering | SAW+LNA+SAW |
| Anti-Electromagnetic/radio frequency interference | EMI+RFI |
| Upgrade firmware | support |
| Support Flight control type | Ardupilot/PX4*(PX4 is still working hard to adapt to the clock) |
| Input voltage | 5V |
| Operating temperature | -10~70℃ |
| Size | 60*60*16MM |
| Weight | 33g |
Related products
Sold out
Sold out
Sold out
SaleHot
Sold out
There are no reviews yet.