CUAV Nora Flight Controller
$359.00
Products include:
- STM32H743 Processor
- RM3100 Industrial Compass
- Integrated Design
CUAV Nora Flight Controller
Nora+ is an advanced autopilot independently designed by CUAV. It uses a higher performance STM32H7 series processor than the PX4 previous-generation flight controller (FMUv5), and integrates high-precision industrial-grade sensors and ultra-low temperature drift sensors. Compared with the previous flight controller, it has better performance and more reliability. This board can run ArduPilot firmware perfectly. Nora is ideal for academic research and commercial system’s integration.
Follow us World Drone Market on our YouTube to view more about CUAV Nora Flight Controller.
H7 Processor Powerful Performance
Nora flight controller uses STM32H743 series processors CPU, Cortex-M7 core (with double precision Floating-Point Unit). It makes operating frequency increase to 480Mhz, 2 MB Flash, 1 MB RAM Meet the higher computing needs of flight controllers Compared with the STM32F7 product line, the dynamic power consumption efficiency is doubled.
Normal Operation Maximum Ratings
Under these conditions all power sources will be used in this order to power the system:
1.POWERA and POWERC inputs (4.3V to 5.4V)
2.USB input (4.75V to 5.25V)
Voltage Ratings
- Nora AutoPilot can be triple-redundant on the power supply if three power sources are supplied. The two power rails are: POWERA, POWERC and *USB.
For more detail, you can visit CUAV Docs
| Weight | 0.5 kg |
|---|---|
| Dimensions | 30 × 20 × 10 cm |
Customers reviews
You must be logged in to post a review.
CUAV Nora Flight Controller User Manual
Main FMU Processor: STM32H743
On-board sensors:- Accelerometer/Gyroscope: ICM-20689
- Accelerometer/Gyroscope: ICM-20649
- Accelerometer/Gyroscope: BMI088
- Magnetometer: RM3100
- Barometer: MS5611*2
- 14 PWM outputs （12 supports Dshot）
- Support multiple RC inputs (SBUs / CPPM / DSM)
- SBUS Output
- Analogue / PWM RSSI input
- 2 GPS ports(GPS and UART4 ports)
- 4 i2c buses(Two i2c dedicated ports)
- 2 CAN bus ports
- 2 Power ports(Power A is common adc interface, Power C is uavcan battery interface)
- 2 ADC intput
- 2 USB ports (Type C and gh 1.25)
- Power: 4.3~5.4V
- USB Input: 4.75~5.25V
- Servo Rail Input: 0~36V
- Weight: 50g
- Size: 46*64*22mm
- Operating temperature: -20 ~ 80°c（Measured value）
- Three imus
- Supports temperature compensation
- Internal shock absorption
- integrated design
Related products
Sold out
Sold out
Sold out
Sold out
Sold out
There are no reviews yet.