Radiolink AT10II 12CH Transmitter With R12DS Receiver
Radiolink AT10II 12CH Transmitter With R12DS Receiver is the first drone remote controller to make DSSS and FHSS work synchronously. 16 channels, pseudo random frequency hopping. QPSK modulation ensures excellent anti-interference performance. It can even control stability in city environments.
To watch more about our products, please visit our YouTube Channel
Radiolink AT10II With R12DS Receiver Description
- Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)
- Modulation mode: QPSK
- Control distance: up to 4 km
- Compatible model: all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multirotor
- Screen: 3.5 inches 16 colorful screens, 320*480 pixels
Radiolink AT10II 12CH Features
- Twelve channels (5 through 12 programmable by user)
- Username and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Transmitter output greater than 100mW
- Operating voltage 7.4 to 15.0v, amperage <105mA
- Adjustable display brightness and contrast
- Multiple alarms
- Fail Safe system: engages when a clean signal is lost or if the receiver battery is low
- Servo reversing
- Servo end-point adjustment
- Adjustable servo travel limit (prevents push rod jamming)
- Servo Cycle function helps locate servo problems
- Adjustable gimbal-stick length and tension
- Dual, Triple and Exponential rates
- Digitally controlled Trim switches
- Sub-Trim program changes the servo neutral position
- Compatible relievers: R12DS (Std pack), R12DSM, R9DS, R6DS and R6DSM
Specifications of this drone remote controller
- Size: AT10II-180*95*220 mm, R12DS-50*32*15 mm
- Weight; 0.95 kg
- Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)
- Modulation mode; QPSK
- Channel bandwidth; 5.0 MHz
- Spread spectrum: DSSS&FHSS
- Adjacent channel rejection: >38dbm
- Transmitter power; <100mW (20dbm )
- Operating current; <105mA
- Operating voltage: 7.4-15.0V
- Control distance: up to 4 km, the actual control distance depends on the flying environment
- Channel; 12 channels, 5-12 channels are customized
- Compatible model: all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multirotor
- Simulator mode: under the simulator mode the transmitter action turns off, changes to power saving mode
- Screen: 3.5 inches 16 colorful screens, 320*480 pixels
- Support receivers: sells with R12DS (SBUS&PWM), compatible with R6DS,R6DSM,R9DS,R12DS
- Dsss and fhss spread spectrum
- More stabilized, faster
- Low consumption of battery
Two signal working mode of R12DS:
(1)PWM signal output working mode: red LED indicates PWM signal output, 11 channels Totally.
(2) S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally.
S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use).
How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meter.
2. Turn on the transmitter, then power on the R12DS.
3. Connect CH3 of R12DS to ESC.
4. There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal Always LED on.
Specification Of the AT10II Transmitter:
Frequency | 2.4GHz ISM band(2400MHz to 2485MHz) |
Modulation Mode | QPSK |
Channel Bandwidth | 5.0MHz |
Spread Spectrum | DSSS,FHSS |
Adjacent Channel Rejection | >38dBM |
Transmitter Power | <100mW(PCB testing), <20dBm(3 meter air testing) |
Operating Current | <95mA |
Operating Voltage | 8.6~15V |
Control Distance | 800 meters ground |
Channel | 10 Channel |
Simulator Mode | Under the simulator model the transmitter action turn off, change to power saving model |
Screen | 16 colorful screens Size 78 x 52 mm 320*480 pixel |
Compatible Model | Include all 120 degree and 90 degree swash plate helicopter, all fix wing and gliders, five flying models. |
Size | 18 x 9.5 x 22 cm |
Weight | 0.95 kg |
Specification Of R12DS Receiver:
Frequency | 2.4GHz |
Channel | 12CH,support SBUS and PWM signal output |
Working Voltage | 4.8-10V |
Working Current | 38-45mA (input voltage: 5V) |
Dimension | 50×31.5×14.5 mm |
Weight | 14g |
Control Range | About 4KM air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations). |
Note: The Radiolink AT10II transmitter is NOT compatible with R10D receiver.
Radiolink AT10II User Manual here
Romes Abi (verified owner) –
I used it to test the 650 drone, and it worked well.
Muhammad Tahir (verified owner) –
This is my favorite radio. It has great weight and feel, lots of channels, and great compatibility. I mean, it works with DJI racing goggles. Extend that range even more. Never have I doubted my signal on this. It solves most interference issues and was built to last.
Gregoire Leonerd (verified owner) –
Already tested it for a few months. Seems to work ok. I lost signal once, not sure if that was because the environment.