Herelink HD Video Transmission System Controller v1.0+Air Unit v1.1
Herelink HD Video Transmission System Controller v1.0+Air Unit v1.1 offers an easy, simple solution. It integrates HD video, data transmission and a ground remote controller for drones.
First, Herelink is developed by CubePilot Hex Technology and ProfiCNC. These teams also created Pixhawk and The Cube GPS system.
Air Unit v1.1 Introduction
Next, the Air Unit v1.1 combines three modules into one single device. They include a data link unit, remote control link and video display unit. This design simplifies complex systems and cuts down size.
It runs on the 2.4 GHz radio band. This band carries control data and command signals. Its max transmission range reaches 20 km. Its lowest latency is 110 ms. It has two HDMI inputs. It supports 720p 30fps, 1080p 30fps and 1080p 60fps video.
The Air Unit accepts 7–12 V input power. It has one UART port. You can connect this port to a flight controller or other Mavlink peripherals. Besides, this new version adds an SD card slot and an Ethernet port.
Herelink Controller v1.0 Introduction
Then we look at the Herelink Controller v1.0. It is also a 2.4 GHz radio controller. It comes with a 5.5-inch screen. Users can access many control settings on this screen. It delivers long-range HD video, telemetry data and control signals. The maximum range is 20 km.
It uses 2.4 GHz LTE-over-Wi-Fi. This setup helps achieve the longest possible transmission distance. For FCC regions, its rated range is 20 km. For CE regions, the range drops to 12 km.
Moreover, the 5.5-inch screen supports many functions. It can show live camera feeds. Users can tune autopilot settings via built-in QGroundControl. It also works with other Mavlink-based ground station software.
Onboard Processor
Both the Air Unit and controller use the Pinecone S1 processor. This chip has four 2.2 GHz cores plus four extra 1.4 GHz cores. This strong computing power supports many apps. It also leaves room for future custom development.
The newest Cube Orange+ Standard sets and Here 3+ GNSS can best fit for Herelink Video Transmission System.
Herelink V1.1 updated points:
1. Ethernet port added on the air unit
2. SD card slot added on the air unit
3. This product is two separate packaging.
Note: Please use the latest version of flasher_win to upgrade your 1.0 controller and 1.1 air unit firmware.
Features
- 2.4 GHz frequency Long Range HD Video Transmission & Controller System
- Android based smart device with 5.46 inch 1080P capacitive touch screen.
- PineSync Technology based on S1 Processor
- Integrated digital transmission system simultaneously transmitting video, telemetry and control.
- Custom Solex TX and QGC ground station software with MAVlink support for Ardupilot and PX4.
- Dual hall effect self centering gimbals with removable sticks.
- 1080P HD video with dual digital video inputs.
- Dual S.bus signal output for simultaneous control of autopilot and pan/tilt cameras.
- 6 customizable Mavlink buttons and Mavlink/Sbus hardware wheel.
- RC gimbal control on dedicated service independent of Solex TX / QGC.
- Tether and share video and telemetry via Wi-Fi ground station such as Mission Planner.
- For developers: the possibility of installing custom applications and custom images and logos
- OTA updates (Other The Air – wireless)
- Wi-Fi, Bluetooth and USB to connect with other devices
- Additional Ethernet Interface on Air Unit
For more product detail, please visit: Herelink Manual
Follow us World Drone Market on YouTube to view more videos about Herelink HD Video Transmission System details.





































There are no reviews yet.