Radiolink AT9S Pro 12CH Transmitter with R9DS Receiver
Radiolink AT9S Pro 2.4GHz 12CH Transmitter with R9DS 10CH Receiver is an affordable radio system made for aircraft with a range of 1.5km. It also includes a 2.8″ LCD screen to keep you informed on your aircraft status. The transmitter comes with the mini size receiver R6Ds. It supports SBUS, PPM, and PWM making it easy to connect.
- RadioLink AT9S PRO 2.4GHz 12CH Transmitter with R9DS 10CH Receiver
- For all airplanes & helicopters, cars, and boats
- Control distance: about 900m ground and 3000m air
- Supports signal strength and voltage monitoring
- Offers vibrating alarm for noisy environment
- Includes hardware to add auto-centering for the left (throttle) joystick
Radiolink AT9S Pro User Manual here
Watch more about products, please visit our YouTube Channel
| Radiolink AT9S Pro 12-Channel Remote Controller | |
| Weight: | 880g |
| Size: | 183*100*193 mm |
| Frequencies Band: | 2.4Ghz ISM band (2400MHz-2483.5MHz) |
| Bandwidth: | 5.0MHz |
| ACPR: | >38dbm |
| Modulation Mode: | QPSK |
| Spread Spectrum Mode: | DSSS&FHSS/CRSF |
| Transmission Power: | DSSS&FHSS<100mW (20dbm) CRSF 10mW/25mW/100mW/500mW/1W/2W (Optional) |
| Operating Voltage: | 7.4~18.0V |
| Operating Current: | DSSS&FHSS<90mA@12V CRSF Depends on the transmission power selected |
| Channel Qty: | 10/12 (CH5 through CH10/12CH can be programmed) |
| Control range: | DSSS&FHSS-4KM in the air (Maximum range is tested in an unobstructed area free of interference) CRSF-Depends on the RX and TX from BLACKSHEEP |
| Signal Output: | PWM/SBUS/PPM/CRSF |
| Compatible receivers: | 12CH-R12DSM, R12DS 10CH-R9DS (Std), R6DS, R6DSM CRSF: RX from BLACKSHEEP |
| Simulator Mode: | the transmitters RF circuit turns off to save battery power |
| Display: | 2.8-inch 16-bit true color screen, resolution 240 * 320 pixels |
| Adaptable Models: | Rotary Wing, Fixed wing, Multicopter, Car, Boat, Robot |
AT9S PRO Features:
Radiolink 2019 AT9S Pro Version TX is a 10/12CH RC radio controller. It supports T8S Crossfires and CRSF protocols, and pairs with the R12DSM Mini 2.4G receiver for racing drones and quadcopters. It works in both Mode 1 and Mode 2.
Strong Anti-Interference Performance
First, it delivers outstanding anti-interference capability. This rc transmitter runs DSSS and FHSS at the same time to maintain reliable anti-interference performance, and it achieves a fast 3ms response across 10 channels.
Native Link plus CRSF Support
Besides its native link, it supports the CRSF protocol. Building on RadioLink’s proprietary DSSS & FHSS communication technology, this remote adds BLACKSHEEP’s CRSF protocol and works well with TBS Crossfires TX modules.
Multiple Signal Compatibility
Moreover, it supports SBUS, PPM, PWM and CRSF signals. Thanks to its DSSS & FHSS stack, SBUS, PPM and PWM can run together for smooth, uninterrupted control. If you use the CRSF protocol, you will need a TBS Crossfires TX to bind with a BLACKSHEEP receiver.
Real-Time Flight Telemetry
In addition, it shows real-time flight data. Once you connect the PRM-03 flight module, the LCD screen displays model voltage, speed, climb rate, throttle, longitude, latitude, altitude, GPS status, RSSI, flight mode, yaw, roll, pitch and distance.
Wide Compatibility for Different Models
Furthermore, it fits nearly all kinds of aircraft. Its intuitive software lets you swap aircraft profiles quickly for rotary wing, fixed wing, multicopter, car, boat and robot models. The transmitter also switches its control layout automatically after you pick a model type.
Easy USB Firmware Update
Also, it supports USB firmware upgrades. You only need a USB cable to connect this transmitter to your PC and flash the newest firmware.
Built-In Voltage Protection
On top of that, it has a built-in voltage protection system. RadioLink’s dedicated voltage protection software shields core hardware from damage caused by reverse polarity connections.
Intuitive and Fast Setup
Best of all, it features simple, user-friendly settings. Its menu layout works great for new hobbyists and experienced pilots alike, and binding only takes one second.
Flexible Power Options
Finally, it accepts many common battery options. The JST port supports 8 AA batteries or 2S–4S LiPo packs (batteries sold separately). A single 3S 1800mAh LiPo battery can power this radio for over 12 hours.
R9DS Receiver:
Control distance: about 4000 meters air, actually control distance depends on the environment.
| Overview: | Radiolink AT9S Pro 12-Channel Remote Controller, 2.4G 12 channels receiver, DSSS and FHSS hybrid dual spread spectrum, 2.5 gram weight, SBUS and PPM signal support, use for Radiolink transmitters AT9, AT9S, AT10 and AT10II, is the best choice for racing drone. |
| SBUS and PWM signal change: | Short press the ID SET switch twice within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS. |
| Two signal working mode: |
Blue/purple LED, SBUS signal , 10 channels totally.
Red LED always, PPM signal, 10 channels totally.
|
| How to match code with transmitter: |
1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R9DS.
3. There is a black button on the R9DS, press the binding button for one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.
|




























Sneddon Leo (verified owner) –
Product arrived on time and in perfect condition
Plug and go set up
Sanjiv Basit (verified owner) –
Variety of receivers even CRSF with the Pro firmware. Definitely best bang for the buck, Simple enough for beginners, complicated enough for experts.
Ryan Freemantle (verified owner) –
It’s a good remote control, not too difficult to set up. But the shipping cost was a little high to Brazil